Jacobs 48/750

750,00 kW
  • ✘ Power data
  • ✔ 6 Pictures
  • ✔ 1 Model




Rated power:750.0 kW
Flexible power ratings:-
Cut-in wind speed:3.0 m/s
Rated wind speed:14.0 m/s
Cut-out wind speed:20.0 m/s
Survival wind speed:60.0 m/s
Wind zone (DIBt):-
Wind class (IEC):-


Diameter:48.4 m
Swept area:1,840.0 m²
Number of blades:3
Rotor speed, max:22.5 U/min
Tipspeed:57 m/s
Type:LM 23.2
Manufacturer:LM Glasfieber
Power density 1:407.6 W/m²
Power density 2:2.5 m²/kW

Gear box



Speed, max:1,500.0 U/min
Voltage:690.0 V
Grid connection:Thyristor
Grid frequency:50.0 Hz


Hub height:50/65/75 m
Type:Steel tube
Corrosion protection:painted


Single blade:-
Rotor:10.0 t
Nacelle:23.0 t
Tower, max:90.0 t
Total weight:125.0 t



Power curve

There are no power data deposited for this turbine.


2x Jacobs 48/600
used, Year 2003, 65m Germany
1x Jacobs 43/600
used, Year 1999, 60m Germany
€ 25.000
2x Jacobs 43/600
used, Year 1998, 60m Germany
1x Jacobs 43/600
used, Year 1998, 60m
€ 28.000
4x Micon M 1500-750
used, 46m United States
1x NEG Micon NM 48/750
used, Year 2005, 55m
1x AN Bonus 600/44 MK IV
used, 42m Sweden
1x Bonus B19/120
used, 23m Canada
€ 15.000
2x Enercon E-48
used, 50m Lithuania
1x GE General Electric GE 1.5s
used Moldova
6x Vestas V80-2.0
used Moldova
1x Nordex N90/2500
used, Year 2009, 80m Germany
€ 360.000
3x Nordtank NTK 600
used, Year 1997, 40m Netherlands
4x Vestas V44
used, Year 1996 Denmark
€ 80.000
1x Vestas V47
used, Year 2001, 65m
2x Vestas V25
used, 30m Germany
3x Micon M 530
used, 30m Poland
8x Bonus B23/150 Gittermast
used, 30m Poland
4x Bonus B23/150 Gittermast
used Poland
1x Nordex N60
used, Year 1997, 69m Germany
powered by wind-turbine.com

Service company for Jacobs 48/750


Jacobs 48/750


The wind turbine 48/750 is a production of Jacobs Energie GmbH, a manufacturer from Germany. Since year 2001, Jacobs Energie GmbH is no longer active. The manufacturer was taken over by REpower Systems SE.

The rated power of Jacobs 48/750 is 750,00 kW. At a wind speed of 3,0 m/s, the wind turbine starts its work. the cut-out wind speed is 20,0 m/s.

The rotor diameter of the Jacobs 48/750 is 48,4 m. The rotor area amounts to 1.840,0 m². The wind turbine is equipped with 3 rotor blades. The maximum rotor speed is 22,5 U/min.

The Jacobs 48/750 is fittet with a spur/planetary gearbox. The gearbox has 3,0 stages. Manufacturer of the transmission is Flender.

In the generator, Jacobs Energie GmbH sets to Asynchronus. The manufacturer has used one generator for the 48/750. The maximum speed of the generator is 1.500,0 U/min. The voltage amounts to 690,0 V. At the mains frequency, the 48/750 is at 50,0 Hz.

In the construction of the tower, the manufacturer uses Steel tube. As corrosion protection for the tower Jacobs focuses on painted. Manufacturer of the tower is Klotz/KGW/Welcon.

We have 6 pictures of this wind turbine. One model has been entered to the wind turbine. This is the Jacobs 48/750 - Desk model. Power data for the 48/750 of Jacobs are not stored in the system.

The Jacobs 48/750 has been listed since 26.01.2013. The last modification of the master data was made on 12.04.2015.

More wind turbines

Jacobs MD 77
1,50 MW
Jacobs 43/600
600,00 kW
Jacobs 41/500
500,00 kW
Jacobs 48/600
600,00 kW
Jacobs MD 70
1,50 MW
Jacobs 57/1000
1,05 MW
Enercon E-115 3.000
3,00 MW
Endurance X-35
225,00 kW
Suzlon S.128-2600
2,60 MW
AMSC wt5500df TC I
5,50 MW
Windey WD25-250
250,00 kW
Bonus B35/450
450,00 kW
UGE VisionAIR5
3,20 kW
Reymo 15/65
65,00 kW
Energovars EWT315
315,00 kW
aerodyn aeolus 15
26,00 kW
Dana Holger Danske HD2
22,00 kW
DeimosWind DT 2169
60,00 kW
Fuerteventura Unknown prototype
AVIC Huide HD 1000
1,00 MW