Qingdao Wind Power X series 10kW

The wind turbine X series 10kW is a production of Qingdao Wind Power Generator Co ltd., a manufacturer from China. This manufacturer has been in business since 2004.

The rated power of Qingdao Wind Power X series 10kW is 10,00 kW. At a wind speed of 3 m/s, the wind turbine starts its work. the cut-out wind speed is 25 m/s.

The rotor diameter of the Qingdao Wind Power X series 10kW is 7,5 m. The rotor area amounts to 44,2 m². The wind turbine is equipped with 3 rotor blades. The maximum rotor speed is 180 U/min.

The Qingdao Wind Power X series 10kW is fittet with a direct drive gearbox.

In the generator, Qingdao Wind Power Generator Co ltd. sets to permanent magnet generator 3-phase AC PM. The manufacturer has used one generator for the X series 10kW. The maximum speed of the generator is 180 U/min. The voltage amounts to 520 V. At the mains frequency, the X series 10kW is at 50 Hz.

In the construction of the tower, the manufacturer uses guy cable tower / mono pole tower. As corrosion protection for the tower Qingdao Wind Power focuses on zinc plating surface paint.

Unfortunately there are no photos available for this wind turbine. There are no models for this wind turbine. Power data for the X series 10kW of Qingdao Wind Power are not stored in the system.

The Qingdao Wind Power X series 10kW has been listed since 18.01.2025.