Senvion MM82A
2,05
MW
- ✘ Power data
- ✘ Pictures
- ✘ Models
Pictures
There are no pictures stored
Datasheet
Power
Rated power:
2,050.0 kW
Flexible power ratings:
-
Cut-in wind speed:
3.5 m/s
Rated wind speed:
14.5 m/s
Cut-out wind speed:
25.0 m/s
Survival wind speed:
-
Wind zone (DIBt):
III
Wind class (IEC):
Ia, S
Rotor
Diameter:
82.0 m
Swept area:
5,281.0 m²
Number of blades:
3
Rotor speed, max:
17.1 U/min
Tipspeed:
73 m/s
Type:
40m blade
Material:
Fiberglass reinforced with epoxy resin
Manufacturer:
LM Wind Power / RE Blade
Power density 1:
388.2 W/m²
Power density 2:
2.6 m²/kW
Gear box
Type:
planetary / helical
Stages:
2.0
Ratio:
1:105.5 (50Hz)
Manufacturer:
Winergy / Eickhoff
Generator
Type:
Doubly-fed induction generator (DFIG)
Number:
1
Speed, max:
1,800.0 U/min
Voltage:
690.0 V
Grid connection:
IGBT Converter
Grid frequency:
50/60 Hz
Manufacturer:
Loher
Tower
Hub height:
59 / 69 / 80 m
Type:
steel tube
Shape:
conical
Corrosion protection:
coated
Manufacturer:
-
Weight
Single blade:
6.4 t
Hub:
17.0 t
Rotor:
36.2 t
Nacelle:
69.0 t
Tower, max:
-
Total weight:
-
Miscellaneous
Installation:
2008
Offshore:
No
Onshore:
Yes
Power curve
There are no power data deposited for this turbine.
Marketplace
9x Senvion MM82B
used, Year 2009, 59m Germany
1x Senvion MM82B
used, 59m Germany
1x Senvion MM92
used, Year 2012, 100m Germany
1x Senvion MM82B
used, Year 2005, 80m Germany
1x Vestas V20
used, Year 1988, 24m
25x Suzlon S 66-1250
used, Year 2007, 56m India
€ 13.965.000
25x Suzlon S 66-1250
used, Year 2007, 56m India
€ 13.965.000
4x Enercon E-32 / 300
used, Year 1993, 30m Ireland
€ 20.000
2x Nordex N27/150
used, Year 1998, 30m Ireland
€ 61.843
2x RRB Energy V27-225
used, 30m Ireland
€ 133.783
2x Nordex N29
used, 30m Ireland
€ 74.464
1x NEG Micon NM 44/750
used, 12m China
€ 890.900
4x Bonus B44/600
used, Year 1999, 1m Spain
1x Enercon E-32 / 300
used, 31m Bulgaria
3x NEG Micon NM 92/2750
used, Year 2004, 80m Netherlands
€ 1.200.000
1x NEG Micon NM 60/1000
used, Year 2001, 70m Poland
2x Gamesa G87
used, Year 2005, 78m Spain
1x Vestas V80 Offshore
used, Year 2014, 100m Poland
€ 24
2x Nordex N80 Alpha
used, Year 2002, 80m Germany
1x Vestas V66-1.65
used, Year 1999, 78m Germany
powered by wind-turbine.com
Service company for Senvion MM82A
Logistics & transport
Companies for logistics & transportationDismantling of wind turbines
Companies for dismantlingFurther operation
Companies for further operationInsurance
Find an insurer for your plantModels
There are no models to this Windturbine.
Description
The wind turbine MM82A is a production of Senvion SE, a manufacturer from Germany. This manufacturer has been in business since 2014. Since year 2019, Senvion SE is no longer active. The manufacturer was taken over by Siemens Gamesa Renewable Energy.
The rated power of Senvion MM82A is 2,05 MW. At a wind speed of 3,5 m/s, the wind turbine starts its work. the cut-out wind speed is 25 m/s.
The rotor diameter of the Senvion MM82A is 82 m. The rotor area amounts to 5.281 m². The wind turbine is equipped with 3 rotor blades. The maximum rotor speed is 17,1 U/min.
The Senvion MM82A is fittet with a planetary / helical gearbox. The gearbox has 2 stages. Manufacturer of the transmission is Winergy / Eickhoff.
In the generator, Senvion SE sets to Doubly-fed induction generator (DFIG). The manufacturer has used one generator for the MM82A. The maximum speed of the generator is 1.800 U/min. The voltage amounts to 690 V. At the mains frequency, the MM82A is at 50 Hz.
In the construction of the tower, the manufacturer uses steel tube. As corrosion protection for the tower Senvion focuses on coated.
Unfortunately there are no photos available for this wind turbine. There are no models for this wind turbine. Power data for the MM82A of Senvion are not stored in the system.
The Senvion MM82A has been listed since 23.11.2024.
The rated power of Senvion MM82A is 2,05 MW. At a wind speed of 3,5 m/s, the wind turbine starts its work. the cut-out wind speed is 25 m/s.
The rotor diameter of the Senvion MM82A is 82 m. The rotor area amounts to 5.281 m². The wind turbine is equipped with 3 rotor blades. The maximum rotor speed is 17,1 U/min.
The Senvion MM82A is fittet with a planetary / helical gearbox. The gearbox has 2 stages. Manufacturer of the transmission is Winergy / Eickhoff.
In the generator, Senvion SE sets to Doubly-fed induction generator (DFIG). The manufacturer has used one generator for the MM82A. The maximum speed of the generator is 1.800 U/min. The voltage amounts to 690 V. At the mains frequency, the MM82A is at 50 Hz.
In the construction of the tower, the manufacturer uses steel tube. As corrosion protection for the tower Senvion focuses on coated.
Unfortunately there are no photos available for this wind turbine. There are no models for this wind turbine. Power data for the MM82A of Senvion are not stored in the system.
The Senvion MM82A has been listed since 23.11.2024.
More wind turbines
Senvion 2.4M110
2,43 MW
Senvion 3.0M122
3,00 MW
Senvion 2.4M114
2,43 MW
Senvion 3.4M114
3,40 MW
Senvion 3.2M122
3,20 MW
Senvion 3.6M140
3,60 MW
Senvion 2.3M120
2,33 MW
Senvion 6.2M152 Onshore
6,15 MW
Senvion MM92
2,05 MW
Senvion 2.3M130
2,30 MW
Senvion 3.4M140
3,40 MW
Senvion 6.3M152 Offshore
6,33 MW
Senvion 2.3M124
2,33 MW
Senvion 3.6M114
3,60 MW
Senvion 6.2M126 Onshore
6,15 MW
Senvion 6.2M152 Offshore
6,15 MW
Senvion 4.2M140
4,20 MW
Senvion 3.2M114
3,20 MW
Senvion 3.4M104
3,40 MW
Senvion 6.3M152 Onshore
6,33 MW