Scanwind SW 3500 DL

The wind turbine SW 3500 DL is a production of Scanwind A/S, a manufacturer from Norway. This manufacturer has been in business since 1999. Since year 2009, Scanwind A/S is no longer active. The manufacturer was taken over by General Electric / GE Renewable Energy.

The rated power of Scanwind SW 3500 DL is 3,50 MW. At a wind speed of 3,5 m/s, the wind turbine starts its work. the cut-out wind speed is 29 m/s.

The rotor diameter of the Scanwind SW 3500 DL is 90,6 m. The rotor area amounts to 6.447 m². The wind turbine is equipped with 3 rotor blades. The maximum rotor speed is 22 U/min.

The Scanwind SW 3500 DL is fittet with a direct drive gearbox.

In the generator, Scanwind A/S sets to synchronous permanent magnet. The manufacturer has used one generator for the SW 3500 DL. The maximum speed of the generator is 22 U/min. The voltage amounts to 690 V. At the mains frequency, the SW 3500 DL is at 50 Hz.

In the construction of the tower, the manufacturer uses steel tube. As corrosion protection for the tower Scanwind focuses on coated.

Unfortunately there are no photos available for this wind turbine. There are no models for this wind turbine. Power data for the SW 3500 DL of Scanwind are not stored in the system.

The Scanwind SW 3500 DL has been listed since 22.01.2024. The last modification of the master data was made on 23.01.2024.