JSW Japan Steel Work J70
1,50
MW
- ✘ Power data
- ✔ 8 Pictures
- ✘ Models
Pictures
Datasheet
Power
Rated power:
1,500.0 kW
Flexible power ratings:
-
Cut-in wind speed:
3.5 m/s
Rated wind speed:
13.0 m/s
Cut-out wind speed:
25.0 m/s
Survival wind speed:
70.0 m/s
Wind zone (DIBt):
-
Wind class (IEC):
IIa
Rotor
Diameter:
70.0 m
Swept area:
3,850.0 m²
Number of blades:
3
Rotor speed, max:
21.0 U/min
Tipspeed:
77 m/s
Type:
J34-a / APX70
Material:
GFRP
Manufacturer:
Japan Steel Works
Power density 1:
389.6 W/m²
Power density 2:
2.6 m²/kW
Gear box
Type:
direct drive
Stages:
-
Ratio:
-
Manufacturer:
-
Generator
Type:
synchronous permanent
Number:
1
Speed, max:
21.0 U/min
Voltage:
660.0 V
Grid connection:
full scale
Grid frequency:
50/60 Hz
Manufacturer:
-
Tower
Hub height:
70 / 77 m
Type:
steel tube
Shape:
conical
Corrosion protection:
coated
Manufacturer:
Japan Steel Works
Weight
Single blade:
4.5 t
Hub:
22.5 t
Rotor:
36.0 t
Nacelle:
94.0 t
Tower, max:
145.0 t
Total weight:
275.0 t
Miscellaneous
Installation:
2006
Offshore:
No
Onshore:
Yes
Power curve
There are no power data deposited for this turbine.
Marketplace
1x GE Vernova GE 1.5sle
used, Year 2009, 80m United States
€ 867.737
2x REpower MD70
used Romania
1x Enercon E-66
used Italy
2x GE Vernova GE 1.5s
used Germany
€ 65.000
1x REpower MD70
used, 65m Germany
8x Enercon E-66
used, Year 2002, 95m
1x GE Vernova GE 1.5sl
used, Year 2002, 100m Germany
€ 150.000
3x GE Vernova GE 1.5s
used, Year 2004, 65m
7x GE Vernova GE 1.5s
used, Year 2002, 65m Netherlands
1x Enercon E-66
used, Year 1998, 65m Germany
Leitwind LTW80 1500
new, 60m Italy
1x REpower MD77
used, Year 2003, 100m Germany
€ 160.000
Leitwind LTW77 1500
new, 62m Italy
Leitwind LTW86 1500
new, 80m Italy
11x GE Vernova GE 1.5s
used, Year 2001, 65m Germany
€ 95.000
1x Enercon E-66
used, Year 1998, 67m Poland
1x GE Vernova GE 1.5s
used Moldova
4x GE Vernova GE 1.5sl
used, Year 2002, 85m
2x REpower MD70
used, Year 2002, 65m Germany
6x GE Vernova GE 1.5sl
used, Year 2002, 85m Germany
€ 195.000
powered by wind-turbine.com
Service company for JSW Japan Steel Work J70
Logistics & transport
Companies for logistics & transportationDismantling of wind turbines
Companies for dismantlingLifetime Extension
Companies for further operationInsurance
Find an insurer for your plantModels
There are no models to this Windturbine.
Description
The wind turbine J70 is a production of JSW Japan Steel Works, LTD, a manufacturer from Japan. Since year 2019, JSW Japan Steel Works, LTD is no longer active.
The rated power of JSW Japan Steel Work J70 is 1,50 MW. At a wind speed of 3,5 m/s, the wind turbine starts its work. the cut-out wind speed is 25 m/s.
The rotor diameter of the JSW Japan Steel Work J70 is 70 m. The rotor area amounts to 3.850 m². The wind turbine is equipped with 3 rotor blades. The maximum rotor speed is 21 U/min.
The JSW Japan Steel Work J70 is fittet with a direct drive gearbox.
In the generator, JSW Japan Steel Works, LTD sets to synchronous permanent. The manufacturer has used one generator for the J70. The maximum speed of the generator is 21 U/min. The voltage amounts to 660 V. At the mains frequency, the J70 is at 50 Hz.
In the construction of the tower, the manufacturer uses steel tube. As corrosion protection for the tower JSW Japan Steel Work focuses on coated. Manufacturer of the tower is Japan Steel Works.
We have 8 pictures of this wind turbine. There are no models for this wind turbine. Power data for the J70 of JSW Japan Steel Work are not stored in the system.
The JSW Japan Steel Work J70 has been listed since 01.05.2023. The last modification of the master data was made on 24.09.2024.
The rated power of JSW Japan Steel Work J70 is 1,50 MW. At a wind speed of 3,5 m/s, the wind turbine starts its work. the cut-out wind speed is 25 m/s.
The rotor diameter of the JSW Japan Steel Work J70 is 70 m. The rotor area amounts to 3.850 m². The wind turbine is equipped with 3 rotor blades. The maximum rotor speed is 21 U/min.
The JSW Japan Steel Work J70 is fittet with a direct drive gearbox.
In the generator, JSW Japan Steel Works, LTD sets to synchronous permanent. The manufacturer has used one generator for the J70. The maximum speed of the generator is 21 U/min. The voltage amounts to 660 V. At the mains frequency, the J70 is at 50 Hz.
In the construction of the tower, the manufacturer uses steel tube. As corrosion protection for the tower JSW Japan Steel Work focuses on coated. Manufacturer of the tower is Japan Steel Works.
We have 8 pictures of this wind turbine. There are no models for this wind turbine. Power data for the J70 of JSW Japan Steel Work are not stored in the system.
The JSW Japan Steel Work J70 has been listed since 01.05.2023. The last modification of the master data was made on 24.09.2024.
More wind turbines
JSW Japan Steel Work J82-2.0D
2,00 MW
JSW Japan Steel Work J82-2.0
2,00 MW
JSW Japan Steel Work J100-2.7
2,70 MW
Goldwind GW 171 / 6250
6,25 MW
Henning Friis Jensen Mølle
4,00 kW
Honnef Turbine 1
15,00 kW
DeimosWind DT 2169
60,00 kW
Windmatic WM 12s-30
30,00 kW
WindMaster / HMZ WM 200
200,00 kW
M.Torres TWT 1.5-77
1,50 MW
enair 200
20,00 kW
DESA A300
300,00 kW
NEG Micon NM 64c/1500
1,50 MW
Hüllmann FHW 100
100,00 kW
SANKO PLANTEC SP330
330,00 kW
ESPE FX EVO 23-60
59,90 kW
DWP D90/19
90,00 kW
Micon M 1800-750
750,00 kW
Senvion India 4.2M160
4,20 MW
AEV 36/500
500,00 kW