ACSA A17/90

The wind turbine A17/90 is a production of ACSA Aerogeneradores Canarios, S.A., a manufacturer from Spain. This manufacturer has been in business since 1985. ACSA Aerogeneradores Canarios, S.A. is no longer active.

The rated power of ACSA A17/90 is 90,00 kW. At a wind speed of 3,3 m/s, the wind turbine starts its work. the cut-out wind speed is 28 m/s.

The rotor diameter of the ACSA A17/90 is 17 m. The rotor area amounts to 227 m². The wind turbine is equipped with 3 rotor blades. The maximum rotor speed is 50,2 U/min.

The ACSA A17/90 is fittet with a 2 stage increasing parallel shafts gearbox. The gearbox has 2 stages. Manufacturer of the transmission is Hansen.

In the generator, ACSA Aerogeneradores Canarios, S.A. sets to induction. The manufacturer has used 2 generators for the A17/90. The maximum speed of the generator is 1.500 U/min. The voltage amounts to 690 V. At the mains frequency, the A17/90 is at 50 Hz.

In the construction of the tower, the manufacturer uses lattice. As corrosion protection for the tower ACSA focuses on hot-galvanized. Manufacturer of the tower is Jensen / Thisted & Jorgensen.

We have 8 pictures of this wind turbine. There are no models for this wind turbine. Power data for the A17/90 of ACSA are not stored in the system.

The ACSA A17/90 has been listed since 29.01.2022. The last modification of the master data was made on 29.01.2022.