Vestas V162-6.2 EnVentus

The wind turbine V162-6.2 EnVentus is a production of Vestas Wind Systems A/S, a manufacturer from Denmark. This manufacturer has been in business since 1979.

The rated power of Vestas V162-6.2 EnVentus is 6,20 MW. At a wind speed of 3 m/s, the wind turbine starts its work. the cut-out wind speed is 24 m/s.

The rotor diameter of the Vestas V162-6.2 EnVentus is 162 m. The rotor area amounts to 20.612 m². The wind turbine is equipped with 3 rotor blades. The maximum rotor speed is 10 U/min.

The Vestas V162-6.2 EnVentus is fittet with a 2 stage planetary gearbox. The gearbox has 2 stages. Manufacturer of the transmission is ZF Wind Power / Winergy.

In the generator, Vestas Wind Systems A/S sets to permanent magnet (PMG). The manufacturer has used one generator for the V162-6.2 EnVentus. The maximum speed of the generator is 431 U/min. The voltage amounts to 800 V. At the mains frequency, the V162-6.2 EnVentus is at 50 Hz.

In the construction of the tower, the manufacturer uses Tubular Steel Tower (TST). High Tubular Steel Tower (HTST). Concrete Hybrid Towers (CHT). or Large Diameter Steel Tower (LDST).

Unfortunately there are no photos available for this wind turbine. One model has been entered to the wind turbine. This is the Vestas V162-6.2 EnVentus - Desk model. Power data for the V162-6.2 EnVentus of Vestas are not stored in the system.

The Vestas V162-6.2 EnVentus has been listed since 09.09.2021. The last modification of the master data was made on 13.01.2024.