Multibrid M5000

The wind turbine M5000 is a production of MULTIBRID Entwicklungsgesellschaft mbH, a manufacturer from Germany. Since year 2010, MULTIBRID Entwicklungsgesellschaft mbH is no longer active. The manufacturer was taken over by AREVA Wind GmbH.

The rated power of Multibrid M5000 is 5,00 MW. At a wind speed of 3,5 m/s, the wind turbine starts its work. the cut-out wind speed is 25,0 m/s.

The rotor diameter of the Multibrid M5000 is 116,0 m. The rotor area amounts to 10.568,0 m². The wind turbine is equipped with 3 rotor blades. The maximum rotor speed is 14,8 U/min.

The Multibrid M5000 is fittet with a planetary gearbox. The gearbox has 2,0 stages. Manufacturer of the transmission is Renk.

In the generator, MULTIBRID Entwicklungsgesellschaft mbH sets to Synchronous permanent. The manufacturer has used one generator for the M5000. The maximum speed of the generator is 147,0 U/min. The voltage amounts to 3.000,0 V. At the mains frequency, the M5000 is at 50,0 Hz.

In the construction of the tower, the manufacturer uses Steel tube. As corrosion protection for the tower Multibrid focuses on painted. Manufacturer of the tower is SSC.

We have 44 pictures of this wind turbine. There are no models for this wind turbine. We have power data on the M5000 from the Multibrid in the system. You can see the powercurve in the diagram above.

The Multibrid M5000 has been listed since 24.08.2011. The last modification of the master data was made on 27.01.2014.