Vergnet GEV HP 1000/55

The wind turbine GEV HP 1000/55 is a production of Vergnet Eolien SA, a manufacturer from France. Vergnet Eolien SA is no longer active.

The rated power of Vergnet GEV HP 1000/55 is 1,00 MW. At a wind speed of 3 m/s, the wind turbine starts its work. the cut-out wind speed is 25 m/s.

The rotor diameter of the Vergnet GEV HP 1000/55 is 55 m. The rotor area amounts to 3.019 m². The wind turbine is equipped with 2 rotor blades. The maximum rotor speed is 26 U/min.

The Vergnet GEV HP 1000/55 is fittet with a epicyclic & parallel gearing gearbox. The gearbox has 3 stages.

In the generator, Vergnet Eolien SA sets to Asynchronous squirrel cage. The manufacturer has used one generator for the GEV HP 1000/55. The voltage amounts to 690 V. At the mains frequency, the GEV HP 1000/55 is at 50 Hz.

In the construction of the tower, the manufacturer uses Guyed wire. Tubular or Lattice. As corrosion protection for the tower Vergnet focuses on marine painting C5. Manufacturer of the tower is Vergnet.

There is one picture of the wind turbine GEV HP 1000/55. There are no models for this wind turbine. Power data for the GEV HP 1000/55 of Vergnet are not stored in the system.

The Vergnet GEV HP 1000/55 has been listed since 16.03.2019.