JONICA IMPIANTI JIMP20
20,00
kW
Small wind turbine
- ✘ Power data
- ✔ 3 Pictures
- ✘ Models
Pictures
Datasheet
Power
Rated power:
20.0 kW
Flexible power ratings:
-
Cut-in wind speed:
3.5 m/s
Rated wind speed:
-
Cut-out wind speed:
26.0 m/s
Survival wind speed:
-
Wind zone (DIBt):
-
Wind class (IEC):
-
Rotor
Diameter:
10.4 m
Swept area:
84.9 m²
Number of blades:
3
Rotor speed, max:
162.0 U/min
Tipspeed:
88 m/s
Type:
-
Material:
GFK / Epoxy
Manufacturer:
-
Power density 1:
235.6 W/m²
Power density 2:
4.2 m²/kW
Gear box
Type:
direct drive
Stages:
-
Ratio:
-
Manufacturer:
-
Generator
Type:
synchronous permanent
Number:
1
Speed, max:
162.0 U/min
Voltage:
400.0 V
Grid connection:
-
Grid frequency:
50 Hz
Manufacturer:
-
Tower
Hub height:
24/30 m
Type:
steel tube
Shape:
conical
Corrosion protection:
hot dip galvanized
Manufacturer:
-
Weight
Single blade:
-
Hub:
-
Rotor:
-
Nacelle:
0.9 t
Tower, max:
-
Total weight:
-
Miscellaneous
Installation:
-
Offshore:
No
Onshore:
Yes
Power curve
There are no power data deposited for this turbine.
Marketplace
100x FREEN 20 kW
new, Year 2024, 12m
1x NEG Micon NM 60/1000
used Italy
1x Nordex N27/150
used, Year 1993 Poland
€ 19.500
1x Wind World W2500
used, Year 1993, 30m Faroe Islands
€ 20.000
1x Windmatic WM 17s-75
used, 23m Poland
€ 15.000
1x Tacke TW 80
used, Year 1993, 40m Germany
3x Vestas V47
used, Year 1998, 65m Germany
€ 450.000
1x RRB Energy V39-500
used
6x Vestas V80 Offshore
used, 110m Germany
1x Enercon E-40/5.40
used, Year 1996, 65m Germany
€ 1
3x enair 70 PRO
used, Year 2005 Germany
1x Jacobs 43/600
used, Year 1998, 60m Poland
€ 28.000
1x Nordex N80 Alpha
used
1x Kestrel Ltd. e400nb
used, 36m Germany
1x Micon M 1500-500
used, 46m Germany
1x Vestas V80 Offshore
used, 78m Poland
2x GE Vernova GE 2.75 - 100
new, Year 2017 Netherlands
2x GE Vernova GE 1.5s
used Germany
€ 65.000
2x NEG Micon NM 48/600
used, Year 1998
4x Vestas V100-1.8
used, Year 2003
powered by wind-turbine.com
Service company for JONICA IMPIANTI JIMP20
Logistics & transport
Companies for logistics & transportationDismantling of wind turbines
Companies for dismantlingLifetime Extension
Companies for further operationInsurance
Find an insurer for your plantModels
There are no models to this Windturbine.
Description
The wind turbine JIMP20 is a production of SEDE CENTRALE GRUPPO JONICA IMPIANTI, a manufacturer from Italy. This manufacturer has been in business since 1992.
The rated power of JONICA IMPIANTI JIMP20 is 20,00 kW. At a wind speed of 3,5 m/s, the wind turbine starts its work. the cut-out wind speed is 26 m/s.
The rotor diameter of the JONICA IMPIANTI JIMP20 is 10,4 m. The rotor area amounts to 84,9 m². The wind turbine is equipped with 3 rotor blades. The maximum rotor speed is 162 U/min.
The JONICA IMPIANTI JIMP20 is fittet with a direct drive gearbox.
In the generator, SEDE CENTRALE GRUPPO JONICA IMPIANTI sets to synchronous permanent. The manufacturer has used one generator for the JIMP20. The maximum speed of the generator is 162 U/min. The voltage amounts to 400 V. At the mains frequency, the JIMP20 is at 50 Hz.
In the construction of the tower, the manufacturer uses steel tube. As corrosion protection for the tower JONICA IMPIANTI focuses on hot dip galvanized.
We have 3 pictures of this wind turbine. There are no models for this wind turbine. Power data for the JIMP20 of JONICA IMPIANTI are not stored in the system.
The JONICA IMPIANTI JIMP20 has been listed since 07.12.2017.
The rated power of JONICA IMPIANTI JIMP20 is 20,00 kW. At a wind speed of 3,5 m/s, the wind turbine starts its work. the cut-out wind speed is 26 m/s.
The rotor diameter of the JONICA IMPIANTI JIMP20 is 10,4 m. The rotor area amounts to 84,9 m². The wind turbine is equipped with 3 rotor blades. The maximum rotor speed is 162 U/min.
The JONICA IMPIANTI JIMP20 is fittet with a direct drive gearbox.
In the generator, SEDE CENTRALE GRUPPO JONICA IMPIANTI sets to synchronous permanent. The manufacturer has used one generator for the JIMP20. The maximum speed of the generator is 162 U/min. The voltage amounts to 400 V. At the mains frequency, the JIMP20 is at 50 Hz.
In the construction of the tower, the manufacturer uses steel tube. As corrosion protection for the tower JONICA IMPIANTI focuses on hot dip galvanized.
We have 3 pictures of this wind turbine. There are no models for this wind turbine. Power data for the JIMP20 of JONICA IMPIANTI are not stored in the system.
The JONICA IMPIANTI JIMP20 has been listed since 07.12.2017.
More wind turbines
JONICA IMPIANTI JIMP30
30,00 kW
JONICA IMPIANTI JIMP25
25,00 kW
JONICA IMPIANTI JIMP60
60,00 kW
TYHI - Taiyuan TZ3000/113
3,00 MW
MingYang MySE6.45-180 Offshore
6,45 MW
Ryse Energy E-5 HAWT
4,00 kW
BestWatt BW45
45,00 kW
Nordex N90 Offshore
2,30 MW
MHI Vestas Offshore V164-8.8 MW
8,80 MW
Siemens Gamesa SG 3.4-132
3,47 MW
Dongfang G2000-116 / FD116-2000 geared
2,00 MW
Unison U136
4,20 MW
Eocycle EO10
11,50 kW
ATB Riva Calzoni ATB 60.28 DD
60,00 kW
Gamesa G126-2.5MW
2,50 MW
NASA WTS-4 Hamilton Standard
4,20 MW
WES 30/250
250,00 kW
WESPA 500/47
500,00 kW
Leitwind LTW80 800
800,00 kW
FREEN 20 kW
20,00 kW