ENESSERE S.r.l. Pegasus
3,40
kW
Small wind turbine
- ✘ Power data
- ✘ Pictures
- ✔ 1 Model
Pictures
There are no pictures stored
Datasheet
Power
Rated power:
3.4 kW
Flexible power ratings:
-
Cut-in wind speed:
2.5 m/s
Rated wind speed:
-
Cut-out wind speed:
20.0 m/s
Survival wind speed:
28.0 m/s
Wind zone (DIBt):
-
Wind class (IEC):
-
Rotor
Diameter:
3.8 m
Swept area:
9.3 m²
Number of blades:
3
Rotor speed, max:
200.0 U/min
Tipspeed:
39 m/s
Type:
NACA 4-digit series cambered
Material:
Carbon Fiber Varnished
Manufacturer:
Enessere
Power density 1:
365.6 W/m²
Power density 2:
2.7 m²/kW
Gear box
Type:
direct drive
Stages:
-
Ratio:
-
Manufacturer:
-
Generator
Type:
3 kW Magnetic Three-Phase Permanent. Exterior Rotor
Number:
1
Speed, max:
200.0 U/min
Voltage:
360.0 V
Grid connection:
IGBT
Grid frequency:
50 Hz
Manufacturer:
Enessere
Tower
Hub height:
8.89 m
Type:
steel tube
Shape:
conical
Corrosion protection:
galvanizing and subsequent painting
Manufacturer:
Enessere
Weight
Single blade:
-
Hub:
-
Rotor:
0.7 t
Nacelle:
-
Tower, max:
-
Total weight:
-
Miscellaneous
Installation:
-
Offshore:
No
Onshore:
Yes
Power curve
There are no power data deposited for this turbine.
Marketplace
1x Vestas V20
used, Year 1988, 24m
25x Suzlon S 66-1250
used, Year 2007, 56m India
€ 13.965.000
25x Suzlon S 66-1250
used, Year 2007, 56m India
€ 13.965.000
4x Enercon E-32 / 300
used, Year 1993, 30m Ireland
€ 20.000
2x Nordex N27/150
used, Year 1998, 30m Ireland
€ 61.843
2x RRB Energy V27-225
used, 30m Ireland
€ 133.783
2x Nordex N29
used, 30m Ireland
€ 74.464
1x NEG Micon NM 44/750
used, 12m China
€ 890.900
4x Bonus B44/600
used, Year 1999, 1m Spain
1x Enercon E-32 / 300
used, 31m Bulgaria
3x NEG Micon NM 92/2750
used, Year 2004, 80m Netherlands
€ 1.200.000
1x NEG Micon NM 60/1000
used, Year 2001, 70m Poland
2x Gamesa G87
used, Year 2005, 78m Spain
1x Vestas V80 Offshore
used, Year 2014, 100m Poland
€ 24
2x Nordex N80 Alpha
used, Year 2002, 80m Germany
1x Vestas V66-1.65
used, Year 1999, 78m Germany
1x Wind World W5200/750
used, Year 1999, 65m Poland
32x Bonus B62/1300
used, 52m Aruba
2x Vestas V29
used, 30m Denmark
2x RRB Energy V27-225
used, 30m Denmark
powered by wind-turbine.com
Service company for ENESSERE S.r.l. Pegasus
Logistics & transport
Companies for logistics & transportationDismantling of wind turbines
Companies for dismantlingFurther operation
Companies for further operationInsurance
Find an insurer for your plantModels
ENESSERE S.r.l. Pegasus
Desk
Description
The wind turbine Pegasus is a production of ENESSERE S.r.l., a manufacturer from Italy.
The rated power of ENESSERE S.r.l. Pegasus is 3,40 kW. At a wind speed of 2,5 m/s, the wind turbine starts its work. the cut-out wind speed is 20 m/s.
The rotor diameter of the ENESSERE S.r.l. Pegasus is 3,76 m. The rotor area amounts to 9,3 m². The wind turbine is equipped with 3 rotor blades. The maximum rotor speed is 200 U/min.
The ENESSERE S.r.l. Pegasus is fittet with a direct drive gearbox.
In the generator, ENESSERE S.r.l. sets to 3 kW Magnetic Three-Phase Permanent. Exterior Rotor. The manufacturer has used one generator for the Pegasus. The maximum speed of the generator is 200 U/min. The voltage amounts to 360 V. At the mains frequency, the Pegasus is at 50 Hz.
In the construction of the tower, the manufacturer uses steel tube. As corrosion protection for the tower ENESSERE S.r.l. focuses on galvanizing and subsequent painting. Manufacturer of the tower is Enessere.
Unfortunately there are no photos available for this wind turbine. One model has been entered to the wind turbine. This is the ENESSERE S.r.l. Pegasus - Desk model. Power data for the Pegasus of ENESSERE S.r.l. are not stored in the system.
The ENESSERE S.r.l. Pegasus has been listed since 29.11.2017.
The rated power of ENESSERE S.r.l. Pegasus is 3,40 kW. At a wind speed of 2,5 m/s, the wind turbine starts its work. the cut-out wind speed is 20 m/s.
The rotor diameter of the ENESSERE S.r.l. Pegasus is 3,76 m. The rotor area amounts to 9,3 m². The wind turbine is equipped with 3 rotor blades. The maximum rotor speed is 200 U/min.
The ENESSERE S.r.l. Pegasus is fittet with a direct drive gearbox.
In the generator, ENESSERE S.r.l. sets to 3 kW Magnetic Three-Phase Permanent. Exterior Rotor. The manufacturer has used one generator for the Pegasus. The maximum speed of the generator is 200 U/min. The voltage amounts to 360 V. At the mains frequency, the Pegasus is at 50 Hz.
In the construction of the tower, the manufacturer uses steel tube. As corrosion protection for the tower ENESSERE S.r.l. focuses on galvanizing and subsequent painting. Manufacturer of the tower is Enessere.
Unfortunately there are no photos available for this wind turbine. One model has been entered to the wind turbine. This is the ENESSERE S.r.l. Pegasus - Desk model. Power data for the Pegasus of ENESSERE S.r.l. are not stored in the system.
The ENESSERE S.r.l. Pegasus has been listed since 29.11.2017.
More wind turbines
ENESSERE S.r.l. Hercules
3,40 kW
CCWE CCWE-1500/D82
1,50 MW
Windey WD88-1500
1,50 MW
Sinovel SL3000/113
3,00 MW
WepfAir Windturbine 2016
80,00 kW
ecotècnia ECO 12/30
30,00 kW
Goldwind GW 191 / 4550
4,55 MW
Brümmer BW 160
20,00 kW
ecotècnia ECO 74/1670
1,67 MW
ecotècnia ECO 44/600
600,00 kW
Gamesa G58
850,00 kW
WestWind WestWind
-
NEG Micon NM 80/2750
2,75 MW
Gamesa G80
2,00 MW
Senvion 3.6M140
3,60 MW
DANREGN Bonus 55
55,00 kW
ESPE FX EVO 21-50
49,90 kW
Wenergy M 23
22,00 kW
Jacobs 37/500
500,00 kW
James Howden HWP-330-33
330,00 kW