Senvion 6.3M152 Offshore

The wind turbine 6.3M152 Offshore is a production of Senvion SE, a manufacturer from Germany. This manufacturer has been in business since 2014. Since year 2019, Senvion SE is no longer active. The manufacturer was taken over by Siemens Gamesa Renewable Energy.

The rated power of Senvion 6.3M152 Offshore is 6,33 MW. At a wind speed of 3,5 m/s, the wind turbine starts its work. the cut-out wind speed is 30 m/s.

The rotor diameter of the Senvion 6.3M152 Offshore is 152 m. The rotor area amounts to 18.146 m². The wind turbine is equipped with 3 rotor blades. The maximum rotor speed is 10,1 U/min.

The Senvion 6.3M152 Offshore is fittet with a spur/planetary gearbox.

In the generator, Senvion SE sets to double fed induction. The manufacturer has used one generator for the 6.3M152 Offshore. The maximum speed of the generator is 1.170 U/min. The voltage amounts to 66.000 V. At the mains frequency, the 6.3M152 Offshore is at 50 Hz.

In the construction of the tower, the manufacturer uses steel tube. As corrosion protection for the tower Senvion focuses on painted.

Unfortunately there are no photos available for this wind turbine. One model has been entered to the wind turbine. This is the Senvion 6.3M152 Offshore - Own building model. Power data for the 6.3M152 Offshore of Senvion are not stored in the system.

The Senvion 6.3M152 Offshore has been listed since 20.09.2017.