Hummer H6.4-5KW
5,00
kW
Small wind turbine
- ✘ Power data
- ✘ Pictures
- ✘ Models
Pictures
There are no pictures stored
Datasheet
Power
Rated power:
5.0 kW
Flexible power ratings:
-
Cut-in wind speed:
3.0 m/s
Rated wind speed:
12.0 m/s
Cut-out wind speed:
25.0 m/s
Survival wind speed:
50.0 m/s
Wind zone (DIBt):
-
Wind class (IEC):
-
Rotor
Diameter:
6.4 m
Swept area:
32.2 m²
Number of blades:
3
Rotor speed, max:
240.0 U/min
Tipspeed:
80 m/s
Type:
3.255m
Material:
Fiberglass reinforced composite
Manufacturer:
-
Power density 1:
155.4 W/m²
Power density 2:
6.4 m²/kW
Gear box
Type:
none. direct drive
Stages:
-
Ratio:
-
Manufacturer:
-
Generator
Type:
Permanent magent alternator.SCF technology
Number:
1
Speed, max:
240.0 U/min
Voltage:
240.0 V
Grid connection:
inverters
Grid frequency:
50/60 Hz
Manufacturer:
-
Tower
Hub height:
site specific m
Type:
steel tube. free + guyed
Shape:
conical
Corrosion protection:
hot dip galvanized
Manufacturer:
-
Weight
Single blade:
-
Hub:
-
Rotor:
-
Nacelle:
-
Tower, max:
-
Total weight:
-
Miscellaneous
Installation:
-
Offshore:
No
Onshore:
Yes
Power curve
There are no power data deposited for this turbine.
Marketplace
1x NEG Micon NM 60/1000
used Italy
1x Nordex N27/150
used, Year 1993 Poland
€ 19.500
1x Wind World W2500
used, Year 1993, 30m Faroe Islands
€ 20.000
1x Windmatic WM 17s-75
used, 23m Poland
€ 15.000
1x Tacke TW 80
used, Year 1993, 40m Germany
3x Vestas V47
used, Year 1998, 65m Germany
€ 450.000
1x RRB Energy V39-500
used
6x Vestas V80 Offshore
used, 110m Germany
1x Enercon E-40/5.40
used, Year 1996, 65m Germany
€ 1
3x enair 70 PRO
used, Year 2005 Germany
1x Jacobs 43/600
used, Year 1998, 60m Poland
€ 28.000
1x Nordex N80 Alpha
used
1x Kestrel Ltd. e400nb
used, 36m Germany
1x Micon M 1500-500
used, 46m Germany
1x Vestas V80 Offshore
used, 78m Poland
2x GE Vernova GE 2.75 - 100
new, Year 2017 Netherlands
2x GE Vernova GE 1.5s
used Germany
€ 65.000
2x NEG Micon NM 48/600
used, Year 1998
4x Vestas V100-1.8
used, Year 2003
1x Nordex N29
used, Year 1996, 50m Austria
€ 45.000
powered by wind-turbine.com
Service company for Hummer H6.4-5KW
Logistics & transport
Companies for logistics & transportationDismantling of wind turbines
Companies for dismantlingLifetime Extension
Companies for further operationInsurance
Find an insurer for your plantModels
There are no models to this Windturbine.
Description
The wind turbine H6.4-5KW is a production of Anhui Hummer Dynamo Co., Ltd., a manufacturer from China.
The rated power of Hummer H6.4-5KW is 5,00 kW. At a wind speed of 3 m/s, the wind turbine starts its work. the cut-out wind speed is 25 m/s.
The rotor diameter of the Hummer H6.4-5KW is 6,4 m. The rotor area amounts to 32,17 m². The wind turbine is equipped with 3 rotor blades. The maximum rotor speed is 240 U/min.
The Hummer H6.4-5KW is fittet with a none. direct drive gearbox.
In the generator, Anhui Hummer Dynamo Co., Ltd. sets to Permanent magent alternator.SCF technology. The manufacturer has used one generator for the H6.4-5KW. The maximum speed of the generator is 240 U/min. The voltage amounts to 240 V. At the mains frequency, the H6.4-5KW is at 50 Hz.
In the construction of the tower, the manufacturer uses steel tube. free + guyed. As corrosion protection for the tower Hummer focuses on hot dip galvanized.
Unfortunately there are no photos available for this wind turbine. There are no models for this wind turbine. Power data for the H6.4-5KW of Hummer are not stored in the system.
The Hummer H6.4-5KW has been listed since 22.07.2017.
The rated power of Hummer H6.4-5KW is 5,00 kW. At a wind speed of 3 m/s, the wind turbine starts its work. the cut-out wind speed is 25 m/s.
The rotor diameter of the Hummer H6.4-5KW is 6,4 m. The rotor area amounts to 32,17 m². The wind turbine is equipped with 3 rotor blades. The maximum rotor speed is 240 U/min.
The Hummer H6.4-5KW is fittet with a none. direct drive gearbox.
In the generator, Anhui Hummer Dynamo Co., Ltd. sets to Permanent magent alternator.SCF technology. The manufacturer has used one generator for the H6.4-5KW. The maximum speed of the generator is 240 U/min. The voltage amounts to 240 V. At the mains frequency, the H6.4-5KW is at 50 Hz.
In the construction of the tower, the manufacturer uses steel tube. free + guyed. As corrosion protection for the tower Hummer focuses on hot dip galvanized.
Unfortunately there are no photos available for this wind turbine. There are no models for this wind turbine. Power data for the H6.4-5KW of Hummer are not stored in the system.
The Hummer H6.4-5KW has been listed since 22.07.2017.
More wind turbines
Hummer H25.0-60KW
60,00 kW
Hummer H21.0-60KW
60,00 kW
Hummer H8.16-10KW
10,00 kW
Hummer H13.2-20KW
20,00 kW
Hummer H25.0-100KW
100,00 kW
Hummer H25.0-200KW
200,00 kW
Hummer H17.0-50KW
50,00 kW
Hummer H13.2-30KW
30,00 kW
Hummer H21.0-100KW
100,00 kW
IMPSA IV 70
1,50 MW
Enercon E-82
2,30 MW
Schuler SDD 100
2,70 MW
Wind World W4100
500,00 kW
Siemens Gamesa SG 4.7-155
4,70 MW
AWP A/S AWP 90/18
90,00 kW
Bornay Wind 13+
1,50 kW
ecotècnia ECO 28/225
225,00 kW
Mitsubishi MWT-92/2.4
2,40 MW
Stoma ST-K60/D22
60,00 kW
Dongfang FD93-2000 geared
2,00 MW