Hummer H13.2-20KW
20,00
kW
Small wind turbine
- ✔ Power data
- ✘ Pictures
- ✘ Models
Pictures
There are no pictures stored
Datasheet
Power
Rated power:
20.0 kW
Flexible power ratings:
-
Cut-in wind speed:
3.0 m/s
Rated wind speed:
9.0 m/s
Cut-out wind speed:
25.0 m/s
Survival wind speed:
50.0 m/s
Wind zone (DIBt):
-
Wind class (IEC):
-
Rotor
Diameter:
13.2 m
Swept area:
136.9 m²
Number of blades:
3
Rotor speed, max:
110.0 U/min
Tipspeed:
76 m/s
Type:
6.2m
Material:
Fiberglass reinforced composite
Manufacturer:
-
Power density 1:
146.1 W/m²
Power density 2:
6.8 m²/kW
Gear box
Type:
none. direct drive
Stages:
-
Ratio:
-
Manufacturer:
-
Generator
Type:
Permanent magent alternator.SCF technology
Number:
1
Speed, max:
110.0 U/min
Voltage:
450.0 V
Grid connection:
inverters
Grid frequency:
50/60 Hz
Manufacturer:
-
Tower
Hub height:
site specific m
Type:
steel tube
Shape:
conical
Corrosion protection:
hot dip galvanized
Manufacturer:
-
Weight
Single blade:
-
Hub:
-
Rotor:
-
Nacelle:
-
Tower, max:
-
Total weight:
-
Miscellaneous
Installation:
-
Offshore:
No
Onshore:
Yes
Power curve
Marketplace
100x FREEN 20 kW
new, Year 2024, 12m
1x NEG Micon NM 60/1000
used Italy
1x Wind World W2500
used, Year 1993, 30m Faroe Islands
€ 20.000
1x Windmatic WM 17s-75
used, 23m Poland
€ 15.000
1x Tacke TW 80
used, Year 1993, 40m Germany
3x Vestas V47
used, Year 1998, 65m Germany
€ 450.000
1x RRB Energy V39-500
used
6x Vestas V80 Offshore
used, 110m Germany
1x Nordex N80 Alpha
used
1x Kestrel Ltd. e400nb
used, 36m Germany
1x Enercon E-40/5.40
used, Year 1996, 65m Germany
€ 1
3x enair 70 PRO
used, Year 2005 Germany
1x Jacobs 43/600
used, Year 1998, 60m Poland
€ 28.000
1x Micon M 1500-500
used, 46m Germany
1x Vestas V80 Offshore
used, 78m Poland
3x Vestas V44
used, Year 1996, 65m Germany
1x Enercon E-66
used, 85m Lithuania
2x GE Vernova GE 2.75 - 100
new, Year 2017 Netherlands
2x GE Vernova GE 1.5s
used Germany
€ 65.000
2x NEG Micon NM 48/600
used, Year 1998
powered by wind-turbine.com
Service company for Hummer H13.2-20KW
Logistics & transport
Companies for logistics & transportationDismantling of wind turbines
Companies for dismantlingLifetime Extension
Companies for further operationInsurance
Find an insurer for your plantModels
There are no models to this Windturbine.
Description
The wind turbine H13.2-20KW is a production of Anhui Hummer Dynamo Co., Ltd., a manufacturer from China.
The rated power of Hummer H13.2-20KW is 20,00 kW. At a wind speed of 3 m/s, the wind turbine starts its work. the cut-out wind speed is 25 m/s.
The rotor diameter of the Hummer H13.2-20KW is 13,2 m. The rotor area amounts to 136,85 m². The wind turbine is equipped with 3 rotor blades. The maximum rotor speed is 110 U/min.
The Hummer H13.2-20KW is fittet with a none. direct drive gearbox.
In the generator, Anhui Hummer Dynamo Co., Ltd. sets to Permanent magent alternator.SCF technology. The manufacturer has used one generator for the H13.2-20KW. The maximum speed of the generator is 110 U/min. The voltage amounts to 450 V. At the mains frequency, the H13.2-20KW is at 50 Hz.
In the construction of the tower, the manufacturer uses steel tube. As corrosion protection for the tower Hummer focuses on hot dip galvanized.
Unfortunately there are no photos available for this wind turbine. There are no models for this wind turbine. We have power data on the H13.2-20KW from the Hummer in the system. You can see the powercurve in the diagram above.
The Hummer H13.2-20KW has been listed since 22.07.2017.
The rated power of Hummer H13.2-20KW is 20,00 kW. At a wind speed of 3 m/s, the wind turbine starts its work. the cut-out wind speed is 25 m/s.
The rotor diameter of the Hummer H13.2-20KW is 13,2 m. The rotor area amounts to 136,85 m². The wind turbine is equipped with 3 rotor blades. The maximum rotor speed is 110 U/min.
The Hummer H13.2-20KW is fittet with a none. direct drive gearbox.
In the generator, Anhui Hummer Dynamo Co., Ltd. sets to Permanent magent alternator.SCF technology. The manufacturer has used one generator for the H13.2-20KW. The maximum speed of the generator is 110 U/min. The voltage amounts to 450 V. At the mains frequency, the H13.2-20KW is at 50 Hz.
In the construction of the tower, the manufacturer uses steel tube. As corrosion protection for the tower Hummer focuses on hot dip galvanized.
Unfortunately there are no photos available for this wind turbine. There are no models for this wind turbine. We have power data on the H13.2-20KW from the Hummer in the system. You can see the powercurve in the diagram above.
The Hummer H13.2-20KW has been listed since 22.07.2017.
More wind turbines
Hummer H13.2-30KW
30,00 kW
Hummer H25.0-100KW
100,00 kW
Hummer H17.0-50KW
50,00 kW
Hummer H21.0-100KW
100,00 kW
Hummer H25.0-200KW
200,00 kW
Hummer H21.0-60KW
60,00 kW
Hummer H25.0-60KW
60,00 kW
Hummer H6.4-5KW
5,00 kW
Hummer H8.16-10KW
10,00 kW
CRRC CWT5000-D195
5,00 MW
WindMaster / HMZ WM 300/28
300,00 kW
Dongfang D2500-110 / DF110-2500 direct drive
2,50 MW
CSIC H60-850
850,00 kW
VAWT Ltd. VAWT-450
130,00 kW
DANREGN Bonus 100
100,00 kW
CSSC H176-6.25
6,25 MW
Bonus B76/2000
2,00 MW
ESPE FX EVO 32-60
60,00 kW
Nordwind GmbH Model 100/15
18,00 kW
WindMaster / HMZ WM 600 VS45
600,00 kW