Siemens SWT-3.3-130 LN

The wind turbine SWT-3.3-130 LN is a production of Siemens Wind Power A/S, a manufacturer from Denmark. This manufacturer has been in business since 2004. Since year 2017, Siemens Wind Power A/S is no longer active. The manufacturer was taken over by Siemens Gamesa Renewable Energy.

The rated power of Siemens SWT-3.3-130 LN is 3,30 MW. At a wind speed of 4,0 m/s, the wind turbine starts its work. the cut-out wind speed is 25,0 m/s.

The rotor diameter of the Siemens SWT-3.3-130 LN is 130,0 m. The rotor area amounts to 13.300,0 m². The wind turbine is equipped with 3 rotor blades. The maximum rotor speed is 12,8 U/min.

The Siemens SWT-3.3-130 LN is fittet with a direct drive gearbox.

In the generator, Siemens Wind Power A/S sets to synchronous permanent. The manufacturer has used one generator for the SWT-3.3-130 LN. The maximum speed of the generator is 12,8 U/min. The voltage amounts to 690,0 V. At the mains frequency, the SWT-3.3-130 LN is at 50 Hz.

In the construction of the tower, the manufacturer uses steel tube. As corrosion protection for the tower Siemens focuses on painted.

We have 14 pictures of this wind turbine. There are no models for this wind turbine. We have power data on the SWT-3.3-130 LN from the Siemens in the system. You can see the powercurve in the diagram above.

The Siemens SWT-3.3-130 LN has been listed since 07.10.2016. The last modification of the master data was made on 07.10.2016.