Pintsch Bamag WR 100/380

100,00 kW
  • ✘ Power data
  • ✘ Pictures
  • ✔ 1 Model


There are no pictures stored



Rated power:100.0 kW
Flexible power ratings:-
Cut-in wind speed:4.0 m/s
Rated wind speed:15.0 m/s
Cut-out wind speed:31.0 m/s
Survival wind speed:55.0 m/s
Wind zone (DIBt):-
Wind class (IEC):-


Diameter:20.0 m
Swept area:314.0 m²
Number of blades:3
Rotor speed, max:60.0 U/min
Tipspeed:63 m/s
Type:8m blades
Power density 1:318.5 W/m²
Power density 2:3.1 m²/kW

Gear box

Type:helical with parallel shafts


Speed, max:1,500.0 U/min
Voltage:380.0 V
Grid connection:thyristors
Grid frequency:50 Hz


Hub height:14 m
Type:steel tubes
Corrosion protection:hot dip galvanized or painted


Single blade:-
Tower, max:-
Total weight:10.5 t



Power curve

There are no power data deposited for this turbine.


1x Ventis V20 100
used, Year 1988, 24m
1x Kenetech KCS-56
used, Year 1985, 18m
2x Ventis V20 100
used, 22m
€ 21.000
1x Ventis V20 100
used Germany
1x AN Bonus 600/44 MK IV
used, 42m Sweden
1x Bonus B19/120
used, 23m Canada
€ 15.000
2x Enercon E-48
used, 50m Lithuania
1x GE General Electric GE 1.5s
used Moldova
6x Vestas V80-2.0
used Moldova
1x Nordex N90/2500
used, Year 2009, 80m Germany
€ 360.000
3x Nordtank NTK 600
used, Year 1997, 40m Netherlands
4x Vestas V44
used, Year 1996 Denmark
€ 80.000
1x Vestas V47
used, Year 2001, 65m
2x Vestas V25
used, 30m Germany
3x Micon M 530
used, 30m Poland
8x Bonus B23/150 Gittermast
used, 30m Poland
4x Bonus B23/150 Gittermast
used Poland
1x Nordex N60
used, Year 1997, 69m Germany
1x Vestas V25
used, Year 1994, 30m Germany
4x Vestas V27 WindWorld Tårn
used, Year 1994, 30m Germany
powered by

Service company for Pintsch Bamag WR 100/380


Pintsch Bamag WR 100/380
Own building


The wind turbine WR 100/380 is a production of Pintsch Bamag GmbH, a manufacturer from Germany. This manufacturer has been in business since 1843.

The rated power of Pintsch Bamag WR 100/380 is 100,00 kW. At a wind speed of 4 m/s, the wind turbine starts its work. the cut-out wind speed is 31 m/s.

The rotor diameter of the Pintsch Bamag WR 100/380 is 20 m. The rotor area amounts to 314 m². The wind turbine is equipped with 3 rotor blades. The maximum rotor speed is 60 U/min.

The Pintsch Bamag WR 100/380 is fittet with a helical with parallel shafts gearbox. Manufacturer of the transmission is Renk.

In the generator, Pintsch Bamag GmbH sets to induction. The manufacturer has used one generator for the WR 100/380. The maximum speed of the generator is 1.500 U/min. The voltage amounts to 380 V. At the mains frequency, the WR 100/380 is at 50 Hz.

In the construction of the tower, the manufacturer uses steel tubes. As corrosion protection for the tower Pintsch Bamag focuses on hot dip galvanized or painted.

Unfortunately there are no photos available for this wind turbine. One model has been entered to the wind turbine. This is the Pintsch Bamag WR 100/380 - Own building model. Power data for the WR 100/380 of Pintsch Bamag are not stored in the system.

The Pintsch Bamag WR 100/380 has been listed since 07.02.2016. The last modification of the master data was made on 07.02.2016.

More wind turbines

Pintsch Bamag WR 120/480
120,00 kW
Vestas V100-2.0
2,00 MW
7,50 kW
Suzlon S.95-2100
2,10 MW
Seewind S 20 110
110,00 kW
WindMaster / HMZ WM 100
100,00 kW
Zephyros Z72
2,00 MW
Windtec WT650
600,00 kW
F.L.Smidth 3 vingers
60,00 kW
Unison U146
4,20 MW
Vensys 120/3000
3,00 MW
Lagerwey L132 3.8 MW
3,80 MW
Senvion 2.4M114
2,43 MW
Leitwind LTW80 1000
1,00 MW
Siemens Gamesa SG 2.1-114
2,10 MW
Fuhrländer FL 30
30,00 kW
SANY SE15536
3,60 MW
WinWinD WWD-3 D100
3,00 MW
EWT DW 54-900
900,00 kW
Goldwind GW 77/1500
1,50 MW