DWP D110/19

The wind turbine D110/19 is a production of Danish Wind Power A/S, a manufacturer from Denmark. This manufacturer has been in business since 1986. Since year 1993, Danish Wind Power A/S is no longer active.

The rated power of DWP D110/19 is 110,00 kW. At a wind speed of 4 m/s, the wind turbine starts its work. the cut-out wind speed is 30 m/s.

The rotor diameter of the DWP D110/19 is 19,2 m. The rotor area amounts to 289 m². The wind turbine is equipped with 3 rotor blades. The maximum rotor speed is 45 U/min.

The DWP D110/19 is fittet with a spur gearbox. Manufacturer of the transmission is Kumera.

In the generator, Danish Wind Power A/S sets to induction. The manufacturer has used one generator for the D110/19. The maximum speed of the generator is 1.200 U/min. The voltage amounts to 480 V. At the mains frequency, the D110/19 is at 60 Hz.

In the construction of the tower, the manufacturer uses steel tube / lattice. As corrosion protection for the tower DWP focuses on hot dip galvanized.

There is one picture of the wind turbine D110/19. There are no models for this wind turbine. We have power data on the D110/19 from the DWP in the system. You can see the powercurve in the diagram above.

The DWP D110/19 has been listed since 29.01.2016. The last modification of the master data was made on 19.04.2016.