Enercon E-115 EP3 3.000 prototype

The wind turbine E-115 EP3 3.000 prototype is a production of Enercon GmbH, a manufacturer from Germany. This manufacturer has been in business since 1984.

The rated power of Enercon E-115 EP3 3.000 prototype is 3,00 MW. At a wind speed of 2,5 m/s, the wind turbine starts its work. the cut-out wind speed is 34 m/s.

The rotor diameter of the Enercon E-115 EP3 3.000 prototype is 115,7 m. The rotor area amounts to 10.516 m². The wind turbine is equipped with 3 rotor blades. The maximum rotor speed is 12,8 U/min.

The Enercon E-115 EP3 3.000 prototype is fittet with a direct drive gearbox.

In the generator, Enercon GmbH sets to synchronous multipole. The manufacturer has used one generator for the E-115 EP3 3.000 prototype. The maximum speed of the generator is 12,8 U/min. At the mains frequency, the E-115 EP3 3.000 prototype is at 50 Hz.

In the construction of the tower, the manufacturer uses steel tube / hybrid. As corrosion protection for the tower Enercon focuses on painted. Manufacturer of the tower is Enercon.

We have 42 pictures of this wind turbine. One model has been entered to the wind turbine. This is the Enercon E-115 EP3 3.000 prototype - Fair model. We have power data on the E-115 EP3 3.000 prototype from the Enercon in the system. You can see the powercurve in the diagram above.

The Enercon E-115 EP3 3.000 prototype has been listed since 02.12.2015. The last modification of the master data was made on 23.12.2018.