IMPSA IV 70
1,50
MW
- ✘ Power data
- ✘ Pictures
- ✘ Models
Pictures
There are no pictures stored
Datasheet
Power
Rated power:
1,500.0 kW
Flexible power ratings:
-
Cut-in wind speed:
3.5 m/s
Rated wind speed:
15.0 m/s
Cut-out wind speed:
25.0 m/s
Survival wind speed:
59.5 m/s
Wind zone (DIBt):
III
Wind class (IEC):
IIa
Rotor
Diameter:
70.0 m
Swept area:
3,886.0 m²
Number of blades:
3
Rotor speed, max:
19.0 U/min
Tipspeed:
70 m/s
Type:
LM 34
Material:
Fiberglass and resin
Manufacturer:
LM Glasfiber A/S
Power density 1:
386.0 W/m²
Power density 2:
2.6 m²/kW
Gear box
Type:
direct drive
Stages:
-
Ratio:
-
Manufacturer:
-
Generator
Type:
synchronous permanent
Number:
1
Speed, max:
19.0 U/min
Voltage:
690.0 V
Grid connection:
inverters
Grid frequency:
45-65 Hz
Manufacturer:
Vensys
Tower
Hub height:
65/85 m
Type:
Steel or concrete
Shape:
conical
Corrosion protection:
painted
Manufacturer:
SIAG/Tube&Tower
Weight
Single blade:
-
Hub:
-
Rotor:
-
Nacelle:
-
Tower, max:
-
Total weight:
-
Miscellaneous
Installation:
-
Offshore:
No
Onshore:
Yes
Power curve
There are no power data deposited for this turbine.
Marketplace
1x GE General Electric GE 1.5sle
used, Year 2009, 80m United States
€ 867.737
2x REpower MD70
used Romania
1x Enercon E-66
used Italy
2x GE General Electric GE 1.5s
used Germany
€ 65.000
1x REpower MD70
used, 65m Germany
8x Enercon E-66
used, Year 2002, 95m
1x GE General Electric GE 1.5sl
used, Year 2002, 100m Germany
€ 150.000
3x GE General Electric GE 1.5s
used, Year 2004, 65m
Leitwind LTW80 1500
new, 60m Italy
7x GE General Electric GE 1.5s
used, Year 2002, 65m Netherlands
1x Enercon E-66
used, Year 1998, 65m Germany
Leitwind LTW77 1500
new, 62m Italy
Leitwind LTW86 1500
new, 80m Italy
1x REpower MD77
used, Year 2003, 100m Germany
€ 160.000
11x GE General Electric GE 1.5s
used, Year 2001, 65m Germany
€ 95.000
1x Enercon E-66
used, Year 1998, 67m Poland
1x GE General Electric GE 1.5s
used Moldova
2x REpower MD70
used, Year 2002, 65m Germany
4x GE General Electric GE 1.5sl
used, Year 2002, 85m
6x GE General Electric GE 1.5sl
used, Year 2002, 85m Germany
€ 195.000
powered by wind-turbine.com
Service company for IMPSA IV 70
Logistics & transport
Companies for logistics & transportationDismantling of wind turbines
Companies for dismantlingFurther operation
Companies for further operationInsurance
Find an insurer for your plantModels
There are no models to this Windturbine.
Description
The wind turbine IV 70 is a production of IMPSA wind, a manufacturer from Brazil.
The rated power of IMPSA IV 70 is 1,50 MW. At a wind speed of 3,5 m/s, the wind turbine starts its work. the cut-out wind speed is 25 m/s.
The rotor diameter of the IMPSA IV 70 is 70 m. The rotor area amounts to 3.886 m². The wind turbine is equipped with 3 rotor blades. The maximum rotor speed is 19 U/min.
The IMPSA IV 70 is fittet with a direct drive gearbox.
In the generator, IMPSA wind sets to synchronous permanent. The manufacturer has used one generator for the IV 70. The maximum speed of the generator is 19 U/min. The voltage amounts to 690 V. At the mains frequency, the IV 70 is at 45 Hz.
In the construction of the tower, the manufacturer uses Steel or concrete. As corrosion protection for the tower IMPSA focuses on painted. Manufacturer of the tower is SIAG/Tube&Tower.
Unfortunately there are no photos available for this wind turbine. There are no models for this wind turbine. Power data for the IV 70 of IMPSA are not stored in the system.
The IMPSA IV 70 has been listed since 25.11.2015.
The rated power of IMPSA IV 70 is 1,50 MW. At a wind speed of 3,5 m/s, the wind turbine starts its work. the cut-out wind speed is 25 m/s.
The rotor diameter of the IMPSA IV 70 is 70 m. The rotor area amounts to 3.886 m². The wind turbine is equipped with 3 rotor blades. The maximum rotor speed is 19 U/min.
The IMPSA IV 70 is fittet with a direct drive gearbox.
In the generator, IMPSA wind sets to synchronous permanent. The manufacturer has used one generator for the IV 70. The maximum speed of the generator is 19 U/min. The voltage amounts to 690 V. At the mains frequency, the IV 70 is at 45 Hz.
In the construction of the tower, the manufacturer uses Steel or concrete. As corrosion protection for the tower IMPSA focuses on painted. Manufacturer of the tower is SIAG/Tube&Tower.
Unfortunately there are no photos available for this wind turbine. There are no models for this wind turbine. Power data for the IV 70 of IMPSA are not stored in the system.
The IMPSA IV 70 has been listed since 25.11.2015.
More wind turbines
IMPSA IWP 70-1.8
1,80 MW
IMPSA IV 77
1,50 MW
IMPSA IWP 83
2,10 MW
IMPSA IWP 100
2,00 MW
IMPSA IV 87
1,50 MW
IMPSA IWP 103
2,00 MW
IMPSA IWP 70-1.5
1,50 MW
IMPSA IV 82
1,50 MW
IMPSA IWP 85
2,00 MW
IMPSA IWP 93
2,10 MW
Kähler Maschinenbau KANO Rotor
30,00 kW
PSW EN-Drive 2000 5kW
5,00 kW
Józef Antos Rebielice Królewskie
2,00 MW
Shanghai Electric W4650-182 / WH4.65N-182
4,65 MW
Made - Endesa AE-52
800,00 kW
DANmark 27
150,00 kW
Enercon E-115 EP2 3.200
3,20 MW
Vergnet GEV 15/60
60,00 kW
Goldwind GW 191 / 6000
6,00 MW
Dongfang DF87-1500 direct drive
1,50 MW