awinco L50-200
50,00
kW
Small wind turbine
- ✘ Power data
- ✘ Pictures
- ✘ Models
Pictures
There are no pictures stored
Datasheet
Power
Rated power:
50.0 kW
Flexible power ratings:
-
Cut-in wind speed:
3.0 m/s
Rated wind speed:
12.0 m/s
Cut-out wind speed:
25.0 m/s
Survival wind speed:
59.5 m/s
Wind zone (DIBt):
-
Wind class (IEC):
IIa
Rotor
Diameter:
16.0 m
Swept area:
200.0 m²
Number of blades:
3
Rotor speed, max:
58.0 U/min
Tipspeed:
48 m/s
Type:
-
Material:
GFK
Manufacturer:
Olsen Blades. DK
Power density 1:
250.0 W/m²
Power density 2:
4.0 m²/kW
Gear box
Type:
direct drive
Stages:
-
Ratio:
-
Manufacturer:
-
Generator
Type:
synchronous permanent
Number:
1.0
Speed, max:
58.0 U/min
Voltage:
400.0 V
Grid connection:
inverters
Grid frequency:
50/60 Hz
Manufacturer:
Sicme Motori
Tower
Hub height:
22 / 30 / 36 m
Type:
steel tube
Shape:
conical
Corrosion protection:
painted
Manufacturer:
MAP
Weight
Single blade:
-
Hub:
-
Rotor:
-
Nacelle:
6.5 t
Tower, max:
-
Total weight:
-
Miscellaneous
Installation:
-
Offshore:
No
Onshore:
Yes
Power curve
There are no power data deposited for this turbine.
Marketplace
1x Vestas V20
used, Year 1988, 24m
25x Suzlon S 66-1250
used, Year 2007, 56m India
€ 13.965.000
25x Suzlon S 66-1250
used, Year 2007, 56m India
€ 13.965.000
4x Enercon E-32 / 300
used, Year 1993, 30m Ireland
€ 20.000
2x Nordex N27/150
used, Year 1998, 30m Ireland
€ 61.843
2x RRB Energy V27-225
used, 30m Ireland
€ 133.783
2x Nordex N29
used, 30m Ireland
€ 74.464
1x NEG Micon NM 44/750
used, 12m China
€ 890.900
4x Bonus B44/600
used, Year 1999, 1m Spain
1x Enercon E-32 / 300
used, 31m Bulgaria
3x NEG Micon NM 92/2750
used, Year 2004, 80m Netherlands
€ 1.200.000
1x NEG Micon NM 60/1000
used, Year 2001, 70m Poland
2x Gamesa G87
used, Year 2005, 78m Spain
1x Vestas V80 Offshore
used, Year 2014, 100m Poland
€ 24
2x Nordex N80 Alpha
used, Year 2002, 80m Germany
1x Vestas V66-1.65
used, Year 1999, 78m Germany
1x Wind World W5200/750
used, Year 1999, 65m Poland
32x Bonus B62/1300
used, 52m Aruba
2x Vestas V29
used, 30m Denmark
2x RRB Energy V27-225
used, 30m Denmark
powered by wind-turbine.com
Service company for awinco L50-200
Logistics & transport
Companies for logistics & transportationDismantling of wind turbines
Companies for dismantlingLifetime Extension
Companies for further operationInsurance
Find an insurer for your plantModels
There are no models to this Windturbine.
Description
The wind turbine L50-200 is a production of awinco GmbH & Co. KG, a manufacturer from Germany.
The rated power of awinco L50-200 is 50,00 kW. At a wind speed of 3,0 m/s, the wind turbine starts its work. the cut-out wind speed is 25,0 m/s.
The rotor diameter of the awinco L50-200 is 15,96 m. The rotor area amounts to 200,0 m². The wind turbine is equipped with 3 rotor blades. The maximum rotor speed is 58,0 U/min.
The awinco L50-200 is fittet with a direct drive gearbox.
In the generator, awinco GmbH & Co. KG sets to synchronous permanent. The manufacturer has used one generator for the L50-200. The maximum speed of the generator is 58,0 U/min. The voltage amounts to 400 V. At the mains frequency, the L50-200 is at 50 Hz.
In the construction of the tower, the manufacturer uses steel tube. As corrosion protection for the tower awinco focuses on painted. Manufacturer of the tower is MAP.
Unfortunately there are no photos available for this wind turbine. There are no models for this wind turbine. Power data for the L50-200 of awinco are not stored in the system.
The awinco L50-200 has been listed since 26.04.2015. The last modification of the master data was made on 05.12.2016.
The rated power of awinco L50-200 is 50,00 kW. At a wind speed of 3,0 m/s, the wind turbine starts its work. the cut-out wind speed is 25,0 m/s.
The rotor diameter of the awinco L50-200 is 15,96 m. The rotor area amounts to 200,0 m². The wind turbine is equipped with 3 rotor blades. The maximum rotor speed is 58,0 U/min.
The awinco L50-200 is fittet with a direct drive gearbox.
In the generator, awinco GmbH & Co. KG sets to synchronous permanent. The manufacturer has used one generator for the L50-200. The maximum speed of the generator is 58,0 U/min. The voltage amounts to 400 V. At the mains frequency, the L50-200 is at 50 Hz.
In the construction of the tower, the manufacturer uses steel tube. As corrosion protection for the tower awinco focuses on painted. Manufacturer of the tower is MAP.
Unfortunately there are no photos available for this wind turbine. There are no models for this wind turbine. Power data for the L50-200 of awinco are not stored in the system.
The awinco L50-200 has been listed since 26.04.2015. The last modification of the master data was made on 05.12.2016.
More wind turbines
awinco L60-330
60,00 kW
Vestas V39
500,00 kW
primus windpower AIR X MARINE
0,40 kW
Sinovel SL1500/70
1,50 MW
Enercon E-147 EP5 E2
5,00 MW
Leitwind LTW104 2500
2,50 MW
SANY SE9315
1,50 MW
Hyundai HQ1650/77
1,65 MW
CCWE CCWE-3000D/D103
3,00 MW
ELKRAFT Avedøre 1MW
1,00 MW
Marlec Rutland WG910
0,05 kW
Goslich GT 10
10,00 kW
ecotècnia ECO 12/30
30,00 kW
Vestas V164-9.5
9,50 MW
Zond Z-50
750,00 kW
Hitachi, Ltd. HTW5.0-126
5,00 MW
PowerWind Ltd. PW100
2,50 MW
Global Wind Power Lt GWP MY - 1500
1,50 MW
Friedrich Böse 10kW
10,00 kW
GE Vernova GE 1.5s
1,50 MW