Yinhe GX103-2.5MW

2,50 MW
  • ✘ Power data
  • ✘ Pictures
  • ✘ Models


There are no pictures stored



Rated power:2,500.0 kW
Flexible power ratings:-
Cut-in wind speed:3.0 m/s
Rated wind speed:7.5 m/s
Cut-out wind speed:25.0 m/s
Survival wind speed:-
Wind zone (DIBt):-
Wind class (IEC):IIIa


Diameter:103.2 m
Swept area:8,329.0 m²
Number of blades:3
Rotor speed, max:14.3 U/min
Tipspeed:77 m/s
Power density 1:300.2 W/m²
Power density 2:3.3 m²/kW

Gear box

Type:direct drive


Type:synchronous permanent
Speed, max:14.3 U/min
Voltage:690.0 V
Grid connection:inverters
Grid frequency:50 Hz


Hub height:80 m
Type:steel tube
Corrosion protection:painted


Single blade:-
Tower, max:-
Total weight:-



Power curve

There are no power data deposited for this turbine.


1x Leitwind LTW101 2500
new, 80m Italy
1x Kenersys K100 2.5MW
new, 135m
1x AN Bonus 600/44 MK IV
used, 42m Sweden
1x Bonus B19/120
used, 23m Canada
€ 15.000
2x Enercon E-48
used, 50m Lithuania
1x GE General Electric GE 1.5s
used Moldova
6x Vestas V80-2.0
used Moldova
1x Nordex N90/2500
used, Year 2009, 80m Germany
€ 360.000
3x Nordtank NTK 600
used, Year 1997, 40m Netherlands
4x Vestas V44
used, Year 1996 Denmark
€ 80.000
1x Vestas V47
used, Year 2001, 65m
2x Vestas V25
used, 30m Germany
3x Micon M 530
used, 30m Poland
8x Bonus B23/150 Gittermast
used, 30m Poland
4x Bonus B23/150 Gittermast
used Poland
1x Nordex N60
used, Year 1997, 69m Germany
1x Vestas V25
used, Year 1994, 30m Germany
4x Vestas V27 WindWorld Tårn
used, Year 1994, 30m Germany
2x enair E70 PRO
€ 4.150.000
2x Vestas V47
used, Year 1999, 55m Sweden
€ 74.000
powered by wind-turbine.com

Service company for Yinhe GX103-2.5MW


There are no models to this Windturbine.


The wind turbine GX103-2.5MW is a production of Yinhe Wind Power Co., Ltd., a manufacturer from China. This manufacturer has been in business since 2007.

The rated power of Yinhe GX103-2.5MW is 2,50 MW. At a wind speed of 3 m/s, the wind turbine starts its work. the cut-out wind speed is 25 m/s.

The rotor diameter of the Yinhe GX103-2.5MW is 103,2 m. The rotor area amounts to 8.329 m². The wind turbine is equipped with 3 rotor blades. The maximum rotor speed is 14,3 U/min.

The Yinhe GX103-2.5MW is fittet with a direct drive gearbox.

In the generator, Yinhe Wind Power Co., Ltd. sets to synchronous permanent. The manufacturer has used one generator for the GX103-2.5MW. The maximum speed of the generator is 14,3 U/min. The voltage amounts to 690 V. At the mains frequency, the GX103-2.5MW is at 50 Hz.

In the construction of the tower, the manufacturer uses steel tube. As corrosion protection for the tower Yinhe focuses on painted.

Unfortunately there are no photos available for this wind turbine. There are no models for this wind turbine. Power data for the GX103-2.5MW of Yinhe are not stored in the system.

The Yinhe GX103-2.5MW has been listed since 06.04.2015.

More wind turbines

Yinhe GX153-6MW
6,00 MW
Yinhe GX93-2.5MW
2,50 MW
Yinhe GX113-2.5MW
2,50 MW
Made - Endesa AE-23
180,00 kW
Senvion 6.2M126 Offshore
6,15 MW
Smedemester Mølle Hørby 18
18,00 kW
bwu BWU 48-750
750,00 kW
Windmatic WM 15s-55
55,00 kW
Made - Endesa AE-52 Prototype
800,00 kW
REpower MD77
1,50 MW
Vestas V52 (NM)
900,00 kW
Aeolos Aeolos-H 20kW
20,00 kW
Vestas V47
660,00 kW
Aria Libellula 20
20,00 kW
Sewind Shanghai El. W1250-62
1,25 MW
Vind-Syssel VS270/26
270,00 kW
HEAG HW2/S2000(110)
2,00 MW
Siemens SWT-3.2-113
3,20 MW
Nordic Windpower AB Nordic 400
400,00 kW
Newinco 14 PI 50/65
65,00 kW