aerodyn SCD 6.0/140 advanced

The wind turbine SCD 6.0/140 advanced is a production of aerodyn Energiesysteme GmbH, a manufacturer from Germany. This manufacturer has been in business since 1983. Since year 2020, aerodyn Energiesysteme GmbH is no longer active. The manufacturer was taken over by AEROVIDE GmbH.

The rated power of aerodyn SCD 6.0/140 advanced is 6,00 MW. At a wind speed of 3 m/s, the wind turbine starts its work. the cut-out wind speed is 22 m/s.

The rotor diameter of the aerodyn SCD 6.0/140 advanced is 140 m. The rotor area amounts to 15.393,8 m². The wind turbine is equipped with 2 rotor blades. The maximum rotor speed is 13,6 U/min.

The aerodyn SCD 6.0/140 advanced is fittet with a planetary gearbox. The gearbox has 2 stages.

In the generator, aerodyn Energiesysteme GmbH sets to synchronous permanent. The manufacturer has used one generator for the SCD 6.0/140 advanced. The maximum speed of the generator is 315 U/min. At the mains frequency, the SCD 6.0/140 advanced is at 50 Hz.

In the construction of the tower, the manufacturer uses steel tube. As corrosion protection for the tower aerodyn focuses on painted.

Unfortunately there are no photos available for this wind turbine. Two models has been entered to this wind turbine. There are the models aerodyn SCD 6.0/140 advanced - Fair model and aerodyn SCD 6.0/140 advanced - Fair model. Power data for the SCD 6.0/140 advanced of aerodyn are not stored in the system.

The aerodyn SCD 6.0/140 advanced has been listed since 15.03.2015.