Windmatic WM 10s-22

22,00 kW
  • ✘ Power data
  • ✔ 1 Picture
  • ✘ Models

Pictures

Datasheet

Power

Rated power:22.0 kW
Flexible power ratings:-
Cut-in wind speed:3.0 m/s
Rated wind speed:15.0 m/s
Cut-out wind speed:25.0 m/s
Survival wind speed:-
Wind zone (DIBt):-
Wind class (IEC):-

Rotor

Diameter:10.2 m
Swept area:81.7 m²
Number of blades:3
Rotor speed, max:67.0 U/min
Tipspeed:36 m/s
Type:-
Material:wood spar with fiberglas skin
Manufacturer:Windmatic
Power density 1:269.3 W/m²
Power density 2:3.7 m²/kW

Gear box

Type:spur
Stages:3.0
Ratio:1:22
Manufacturer:-

Generator

Type:induction
Number:1
Speed, max:1,500.0 U/min
Voltage:380.0 V
Grid connection:thyristors
Grid frequency:50 Hz
Hersteller:-

Tower

Hub height:12 m
Type:lattice
Shape:-
Corrosion protection:hot dip galvanized
Manufacturer:-

Weight

Single blade:-
Hub:-
Rotor:-
Nacelle:2.0 t
Tower, max:-
Total weight:-

Miscellaneous

Installation:-
Offshore:No
Onshore:Yes

Power curve

There are no power data deposited for this turbine.

Marketplace

3x Windmatic WM 17-75
used, Year 1984, 85m Canada
€ 1
1x Windmatic WM 17-75
used, 23m Poland
€ 15.000
1x AN Bonus 600/44 MK IV
used, 42m Sweden
1x Bonus B19/120
used, 23m Canada
€ 15.000
2x Enercon E-48
used, 50m Lithuania
1x General Electric GE 1.5s
used Moldova
6x Vestas V80-2.0
used Moldova
1x Nordex N90/2500
used, Year 2009, 80m Germany
€ 360.000
3x Nordtank NTK 600
used, Year 1997, 40m Netherlands
4x Vestas V44
used, Year 1996 Denmark
€ 80.000
1x Vestas V47
used, Year 2001, 65m
2x Vestas V25
used, 30m Germany
3x Micon M 530
used, 30m Poland
8x Bonus B23/150 Gittermast
used, 30m Poland
4x Bonus B23/150 Gittermast
used Poland
1x Nordex N60
used, Year 1997, 69m Germany
1x Vestas V25
used, Year 1994, 30m Germany
4x Vestas V27 WindWorld Tårn
used, Year 1994, 30m Germany
2x enair E70 PRO
used
€ 4.150.000
2x Vestas V47
used, Year 1999, 55m Sweden
€ 74.000
powered by wind-turbine.com

Models

There are no models to this Windturbine.

Description

The wind turbine WM 10s-22 is a production of Wind Matic A/S, a manufacturer from Denmark. This manufacturer has been in business since 1979. Since year 1988, Wind Matic A/S is no longer active. The manufacturer was taken over by Tellus Energy Systems A/S.

The rated power of Windmatic WM 10s-22 is 22,00 kW. At a wind speed of 3 m/s, the wind turbine starts its work. the cut-out wind speed is 25 m/s.

The rotor diameter of the Windmatic WM 10s-22 is 10,2 m. The rotor area amounts to 81,7 m². The wind turbine is equipped with 3 rotor blades. The maximum rotor speed is 67 U/min.

The Windmatic WM 10s-22 is fittet with a spur gearbox. The gearbox has 3 stages.

In the generator, Wind Matic A/S sets to induction. The manufacturer has used one generator for the WM 10s-22. The maximum speed of the generator is 1.500 U/min. The voltage amounts to 380 V. At the mains frequency, the WM 10s-22 is at 50 Hz.

In the construction of the tower, the manufacturer uses lattice. As corrosion protection for the tower Windmatic focuses on hot dip galvanized.

There is one picture of the wind turbine WM 10s-22. There are no models for this wind turbine. Power data for the WM 10s-22 of Windmatic are not stored in the system.

The Windmatic WM 10s-22 has been listed since 11.02.2015. The last modification of the master data was made on 13.06.2016.

More wind turbines

Windmatic WM 14s-65
65,00 kW
Windmatic WM 15s-55
55,00 kW
Windmatic WM 19-99
99,00 kW
Windmatic WM 19-105
105,00 kW
Windmatic WM 14-55
55,00 kW
Windmatic WM 17s-95
95,00 kW
Windmatic WM 17s-75
75,00 kW
Windmatic WM 20s
130,00 kW
Windmatic WM 15s-66
66,00 kW
Windmatic WM 17-75
75,00 kW
Windmatic WM 12s-30
30,00 kW
Windmatic WM 23-200
200,00 kW
ReGen Powertech VENSYS 82
1,50 MW
PSW EN-Drive 2000 3kW
3,00 kW
Kværner Turbin AB Näsudden I WTS-75
2,00 MW
NORTHEL ORSA DD 65/1200
1,20 MW
Enercon E-33 / 300
300,00 kW
Anelion SW 3.5 GT
3,50 kW
HVK Herborg HVK 37
37,00 kW
DANREGN Bonus 65
65,00 kW