Senvion 3.0M122

The wind turbine 3.0M122 is a production of Senvion SE, a manufacturer from Germany. This manufacturer has been in business since 2014. Since year 2019, Senvion SE is no longer active. The manufacturer was taken over by Siemens Gamesa Renewable Energy.

The rated power of Senvion 3.0M122 is 3,00 MW. At a wind speed of 3,0 m/s, the wind turbine starts its work. the cut-out wind speed is 22,0 m/s.

The rotor diameter of the Senvion 3.0M122 is 122,0 m. The rotor area amounts to 11.690,0 m². The wind turbine is equipped with 3 rotor blades. The maximum rotor speed is 11,3 U/min.

The Senvion 3.0M122 is fittet with a spur/planetary gearbox. The gearbox has 3,0 stages.

In the generator, Senvion SE sets to Double Fed Asyn. The manufacturer has used one generator for the 3.0M122. The maximum speed of the generator is 1.200,0 U/min. The voltage amounts to 30.000,0 V. At the mains frequency, the 3.0M122 is at 50,0 Hz.

In the construction of the tower, the manufacturer uses Steel tube/Hybrid. As corrosion protection for the tower Senvion focuses on painted.

We have 11 pictures of this wind turbine. There are no models for this wind turbine. We have power data on the 3.0M122 from the Senvion in the system. You can see the powercurve in the diagram above.

The Senvion 3.0M122 has been listed since 10.02.2014. The last modification of the master data was made on 27.04.2015.