AN Bonus 1300/62

The wind turbine 1300/62 is a production of AN Wind Energie GmbH, a manufacturer from Germany. Since year 2005, AN Wind Energie GmbH is no longer active. The manufacturer was taken over by Siemens Wind Power A/S.

The rated power of AN Bonus 1300/62 is 1,30 MW. At a wind speed of 3,0 m/s, the wind turbine starts its work. the cut-out wind speed is 25,0 m/s.

The rotor diameter of the AN Bonus 1300/62 is 62,0 m. The rotor area amounts to 3.019,0 m². The wind turbine is equipped with 3 rotor blades. The maximum rotor speed is 19,0 U/min.

The AN Bonus 1300/62 is fittet with a spur/planetary gearbox. The gearbox has 3,0 stages. Manufacturer of the transmission is Flender.

In the generator, AN Wind Energie GmbH sets to Asynchronus. The manufacturer has used one generator for the 1300/62. The maximum speed of the generator is 1.500,0 U/min. The voltage amounts to 690,0 V. At the mains frequency, the 1300/62 is at 50,0 Hz.

In the construction of the tower, the manufacturer uses Tubular steel. As corrosion protection for the tower AN Bonus focuses on coated. Manufacturer of the tower is Roug/KGW/SSC.

We have 64 pictures of this wind turbine. One model has been entered to the wind turbine. This is the AN Bonus 1300/62 - Desk model. We have power data on the 1300/62 from the AN Bonus in the system. You can see the powercurve in the diagram above.

The AN Bonus 1300/62 has been listed since 08.10.2011. The last modification of the master data was made on 27.04.2019.