Clipper C99
2,50
MW
- ✘ Power data
- ✔ 1 Picture
- ✔ 1 Model
Pictures
Datasheet
Power
Rated power:
2,500.0 kW
Flexible power ratings:
-
Cut-in wind speed:
4.0 m/s
Rated wind speed:
12.5 m/s
Cut-out wind speed:
25.0 m/s
Survival wind speed:
70.0 m/s
Wind zone (DIBt):
-
Wind class (IEC):
IIIb
Rotor
Diameter:
99.0 m
Swept area:
7,698.0 m²
Number of blades:
3
Rotor speed, max:
15.5 U/min
Tipspeed:
80 m/s
Type:
48.2
Material:
Fiberglas
Manufacturer:
-
Power density 1:
324.8 W/m²
Power density 2:
3.1 m²/kW
Gear box
Type:
Spur
Stages:
2.0
Ratio:
-
Manufacturer:
-
Generator
Type:
Synchronous permanent
Number:
4.0
Speed, max:
1,133.0 U/min
Voltage:
690.0 V
Grid connection:
IGBT
Grid frequency:
60.0 Hz
Manufacturer:
-
Tower
Hub height:
80.0 m
Type:
Steel tube
Shape:
conical
Corrosion protection:
painted
Manufacturer:
-
Weight
Single blade:
-
Hub:
-
Rotor:
-
Nacelle:
-
Tower, max:
-
Total weight:
-
Miscellaneous
Installation:
-
Offshore:
No
Onshore:
Yes
Power curve
There are no power data deposited for this turbine.
Marketplace
2x Nordex N80 Alpha
used, Year 2002, 80m Germany
1x NEG Micon NM 80/2500
used, Year 1989, 30m Finland
€ 29.000
1x Nordex N90/2500
used, 80m
€ 230
1x Nordex N90/2500
used, 80m Netherlands
1x Nordex N80 Alpha
used
1x Nordex N90/2500
used, Year 2009, 80m Germany
€ 360.000
5x Nordex N80 Alpha
used, Year 2005, 80m Netherlands
€ 280.000
1x Nordex N90/2500
used, 80m Spain
8x Nordex N90/2500
used, Year 2007
1x Nordex N80 Alpha
used Azerbaijan
8x Nordex N80 Alpha
used, Year 2002, 80m
1x Nordex N80 Alpha
used, 80m Netherlands
1x Nordex N80 Alpha
used, 80m Germany
1x Nordex N90/2500
used, Year 2006, 80m France
€ 230.000
5x Nordex N90/2500
used, Year 2007, 80m France
€ 298.000
5x Nordex N90/2500
used, Year 2006, 80m Spain
€ 199.000
1x Vestas V20
used, Year 1988, 24m
25x Suzlon S 66-1250
used, Year 2007, 56m India
€ 13.965.000
25x Suzlon S 66-1250
used, Year 2007, 56m India
€ 13.965.000
4x Enercon E-32 / 300
used, Year 1993, 30m Ireland
€ 20.000
powered by wind-turbine.com
Service company for Clipper C99
Logistics & transport
Companies for logistics & transportationDismantling of wind turbines
Companies for dismantlingFurther operation
Companies for further operationInsurance
Find an insurer for your plantModels
Clipper C99
Desk
Description
The wind turbine C99 is a production of Clipper Windpower, a manufacturer from United States. Clipper Windpower is no longer active.
The rated power of Clipper C99 is 2,50 MW. At a wind speed of 4,0 m/s, the wind turbine starts its work. the cut-out wind speed is 25,0 m/s.
The rotor diameter of the Clipper C99 is 99,0 m. The rotor area amounts to 7.698,0 m². The wind turbine is equipped with 3 rotor blades. The maximum rotor speed is 15,5 U/min.
The Clipper C99 is fittet with a Spur gearbox. The gearbox has 2,0 stages.
In the generator, Clipper Windpower sets to Synchronous permanent. The manufacturer has used 4.0 generators for the C99. The maximum speed of the generator is 1.133,0 U/min. The voltage amounts to 690,0 V. At the mains frequency, the C99 is at 60,0 Hz.
In the construction of the tower, the manufacturer uses Steel tube. As corrosion protection for the tower Clipper focuses on painted.
There is one picture of the wind turbine C99. One model has been entered to the wind turbine. This is the Clipper C99 - Desk model. Power data for the C99 of Clipper are not stored in the system.
The Clipper C99 has been listed since 27.02.2013. The last modification of the master data was made on 26.04.2015.
The rated power of Clipper C99 is 2,50 MW. At a wind speed of 4,0 m/s, the wind turbine starts its work. the cut-out wind speed is 25,0 m/s.
The rotor diameter of the Clipper C99 is 99,0 m. The rotor area amounts to 7.698,0 m². The wind turbine is equipped with 3 rotor blades. The maximum rotor speed is 15,5 U/min.
The Clipper C99 is fittet with a Spur gearbox. The gearbox has 2,0 stages.
In the generator, Clipper Windpower sets to Synchronous permanent. The manufacturer has used 4.0 generators for the C99. The maximum speed of the generator is 1.133,0 U/min. The voltage amounts to 690,0 V. At the mains frequency, the C99 is at 60,0 Hz.
In the construction of the tower, the manufacturer uses Steel tube. As corrosion protection for the tower Clipper focuses on painted.
There is one picture of the wind turbine C99. One model has been entered to the wind turbine. This is the Clipper C99 - Desk model. Power data for the C99 of Clipper are not stored in the system.
The Clipper C99 has been listed since 27.02.2013. The last modification of the master data was made on 26.04.2015.
More wind turbines
Clipper C100
2,50 MW
Clipper C89
2,50 MW
Clipper C96
2,50 MW
Clipper C93
2,50 MW
Clipper C89
2,50 MW
Vensys 155/6200
6,20 MW
Poulsen MK I "the Stork"
30,00 kW
NPS Vortex 6000
6,00 kW
Global Wind Power Lt GWP82-2000kW
2,00 MW
Nordtank NTK 1500 60
1,50 MW
Holger Danske HD 1
5,50 kW
Danish Wind Turbines 100 kW
100,00 kW
Seawind 6 - 126
6,20 MW
Iskra AT5-1
5,00 kW
Unison U54
750,00 kW
Dongfang G5000-127 / FD127-5000 geared
5,00 MW
Unison U146
4,20 MW
Smedemester Mølle Smedemestermolle
22,00 kW
HOLEC WPS-30/3
310,00 kW
Reymo 15/65
65,00 kW